lwr Posted September 28 Share Posted September 28 FS Paul Hynes SR7T Linear Power Supply with one 19VDC / 10 Amp output, one 12VDC / 12 Amp output, soft start, silver wiring, and two silver interconnecting cables. Original owner. Double boxed packing and shipping included. Continental USA only. PayPal family and friends payment. $1750 SB88200 cable modem, EdgeRouterX SFP router, 2 series PFU Buffalo BS-GS2016 switches w/ SR7T LPS and Finisar FTLX1475D3BTL SFPs, Taiko NetCard, JCAT USBCard XE w/ JCAT Optimo 3 Duo LPS; DIY Taiko Extreme w/ Taiko DC-ATX, and Nenon design Level 3 supply; Denafrips GAIA DDC w/ Revelation Audio Prophecy Cryro Silver I2S connection to Denafrips Terminator Plus DAC; modified Pass Labs XP22 preamp, Pass X600.8 monoblocks, restored and modified Sound Lab M-1 electrostats with hot rod backplates Link to comment
rjc1845 Posted Sunday at 11:10 AM Share Posted Sunday at 11:10 AM How are cables terminated? Link to comment
87mpi Posted Sunday at 11:59 AM Share Posted Sunday at 11:59 AM Is 110V only? Doepke DFS 2 Audio/Gigawatt G-C16A/LC-Y Evo/FT-SWS NCF/Gigawatt LC3-EVO /LC2-Evo/LC3 MK3/Toroidy DC Blocker w FI-09 NCF FI-E30 NCF/Hdplex H5 I/Asus C8DH/R9 5950X/Optane M10 64GB/Apacer 2xGB DDR4 ECC/Usb XE/Sablon USB Evo/Audiowise Opto USB/Net XE/Viablue EP-7S/Sablon Ethernet 2020/DC cables Neotech OCC JSSG360/Hdplex 500W DC ATX/2x Paul Hynes SR4T/Fidelizer StreamHub/Holo Spring 3 KTE/ARC LS5 w Fi-09 NCF /Proceed HPA2 w WBT 0702.12 Signature/Opera Callas Diva w Mundorf SGO Caps/Townshend Isolda EDCT/2x DCT 300 XLR/All SR Purple fuses/Townshend Seismic Pods Link to comment
lwr Posted Sunday at 04:18 PM Author Share Posted Sunday at 04:18 PM There is a back panel selection of 115 or 230 VAC. SB88200 cable modem, EdgeRouterX SFP router, 2 series PFU Buffalo BS-GS2016 switches w/ SR7T LPS and Finisar FTLX1475D3BTL SFPs, Taiko NetCard, JCAT USBCard XE w/ JCAT Optimo 3 Duo LPS; DIY Taiko Extreme w/ Taiko DC-ATX, and Nenon design Level 3 supply; Denafrips GAIA DDC w/ Revelation Audio Prophecy Cryro Silver I2S connection to Denafrips Terminator Plus DAC; modified Pass Labs XP22 preamp, Pass X600.8 monoblocks, restored and modified Sound Lab M-1 electrostats with hot rod backplates Link to comment
lwr Posted Sunday at 04:26 PM Author Share Posted Sunday at 04:26 PM 5 hours ago, rjc1845 said: How are cables terminated? The 12VDC cable is terminated with an 8 pin molex plug as is used for a motherboard EPS CPU power socket. the 19VDC cable is terminated with a 6 pin molex plug as is used for a Taiko or a HDPlex 800W DC / DC ATX. These are heavy gauge silver cables with the factory terminations. If you want, you can send me different terminations and I will install them for you. SB88200 cable modem, EdgeRouterX SFP router, 2 series PFU Buffalo BS-GS2016 switches w/ SR7T LPS and Finisar FTLX1475D3BTL SFPs, Taiko NetCard, JCAT USBCard XE w/ JCAT Optimo 3 Duo LPS; DIY Taiko Extreme w/ Taiko DC-ATX, and Nenon design Level 3 supply; Denafrips GAIA DDC w/ Revelation Audio Prophecy Cryro Silver I2S connection to Denafrips Terminator Plus DAC; modified Pass Labs XP22 preamp, Pass X600.8 monoblocks, restored and modified Sound Lab M-1 electrostats with hot rod backplates Link to comment
lwr Posted Sunday at 04:39 PM Author Share Posted Sunday at 04:39 PM This SR7T was designed to be more than sufficient to power a Taiko DC / DC ATX board with the 19 VDC @ 10 Amps output, with a separate high current 12VDC @ 12 Amps for a direct to processor connection. If you look at the photo of the inside of the unit, you’ll see what is no doubt the largest transformer you’ve ever seen in a LPS. It is even much larger than the one that Taiko uses in its $27,000 Extreme Server. l have used it with a wide range of computer servers that I have had over the years, and it has sounded superb on everything from a NUC to a Taiko DIY Extreme with two Xenon Silver CPUs on one Asus server motherboard. As you may know, these LPSs are legendary for their ability to provide deep powerful bass, excellent tonality through the mid and top end, and extremely clean and extended highs. They are now quite literally “unobtanim” since Paul Hanes closed his businesses right after I bought this LPS. The only reason that I’m selling it is that I have recently been fortunate enough to buy Nenon’s Taiko Extreme, and I have no use for it anymore. I am an old retired audiophile who has been a long subscriber of AudiophileStyle since its inception. I am also a long time subscriber of Audiogon and DIY audio. My seller rating is no doubt 100% on all sites, but when I do get around to selling equipment, I usually sell it to my friends; so the number of my online sales is quite low. AngeloVRA 1 SB88200 cable modem, EdgeRouterX SFP router, 2 series PFU Buffalo BS-GS2016 switches w/ SR7T LPS and Finisar FTLX1475D3BTL SFPs, Taiko NetCard, JCAT USBCard XE w/ JCAT Optimo 3 Duo LPS; DIY Taiko Extreme w/ Taiko DC-ATX, and Nenon design Level 3 supply; Denafrips GAIA DDC w/ Revelation Audio Prophecy Cryro Silver I2S connection to Denafrips Terminator Plus DAC; modified Pass Labs XP22 preamp, Pass X600.8 monoblocks, restored and modified Sound Lab M-1 electrostats with hot rod backplates Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now